Here’s the answer to my question in the previous Blog, ”Where it all Began”.
My partner, Roger and I dock out boats on the same pier in the Marina. I knew he was in the manufacturing business, so I asked if he would take a look at the new “Landing Loop” I developed. He said, “I think you may have something here”. Let’s talk to the engineers about it. So, we did.
After that discussion, we refined the design several more times. Patents were filed, Trademarks were registered, molds were made and refined, packaging was designed and completed, and product was manufactured.
We tested the Landing Loop in several locations and under several different conditions. The test included testing it with 10 different types and sizes of lines. Tests were performed on all kinds and sizes of boats and cleats. Tests were made in salt water and fresh water. We tested the Landing Loop on pilings, poles, cleats, logs, and other boats. We even tried it on paint cans. We developed a light weight extra strong telescoping pole, special nylon re-enforced tips for the frame, and a special process for making the frame rust and UV resistant. The final development was the instructional video to teach every user how to dock with the Landing loop before they use it for docking. The video is included with your purchase.
The Landing Loop is a wonderful safety tool. If used correctly it will greatly reduce the injuries and damage to boats while docking. Watch the video and practice a few times.. Then go out and enjoy your boat. No more frustrations while docking. No more yelling at your spouse or mate. If you can get within 6-8 feet of the dock, you can easily tie up using the Landing Loop.
Remember… Never Jump off your boat again… Just reach for your Landing Loop.
Thanks,
Captain Al
P. S. Watch for our new product introduction in October, 2009. Stop fighting that shrunken canvas cover… Grab a “Snap Stretcher”